Select Page
Jet Wash Lance: A Complete Technical Guide for Engineers

Jet Wash Lance: A Complete Technical Guide for Engineers

A lot of readers land on this problem the same way. The washer still runs, the gun still opens, but cleaning performance has fallen off, the spray pattern looks wrong, or a new lance has just failed after what should have been routine service. In most cases, the lance...
Solenoid 3 Way Valve

Solenoid 3 Way Valve

A machine is down, the operator wants it back in service, and the fault seems to sit around one small valve block that should be doing a very simple job. It isn't simple in practice. A solenoid 3 way valve often sits at the point where a system has to do more...
What Is Duty Cycle: Hydraulic System Prevention

What Is Duty Cycle: Hydraulic System Prevention

Duty cycle is the percentage of time a component is active within a full operating cycle, calculated as D = (Operating Time / Total Cycle Time) × 100%. If a device runs for 10 seconds on and 10 seconds off, its duty cycle is 50%. If you're checking a spec sheet,...
How to Size a Motor: Ultimate Guide 2026

How to Size a Motor: Ultimate Guide 2026

You're probably here because a motor choice that looked simple on paper has started to unravel. The load isn't as steady as the machine builder first said. The available space is tighter than the drawing suggested. Someone has asked whether an electric drive...
What Is a Check Valve? a UK Engineer’s Guide to Hydraulics

What Is a Check Valve? a UK Engineer’s Guide to Hydraulics

A check valve is a one-way valve that allows hydraulic fluid to flow in one direction while automatically preventing backflow, protecting pumps and other components from damage. In hydraulic service, that action is governed by cracking pressure, which can range from 3...
Inline Valve Installation: A Practical UK Guide for 2026

Inline Valve Installation: A Practical UK Guide for 2026

A machine is down, the operator is waiting, and someone has already asked how long the repair will take. That's usually when inline valve installation stops being a tidy workshop exercise and becomes a real test of judgement. The valve itself might be small, but...