Select Page
Ball Valves High Pressure: How to Select the Right One

Ball Valves High Pressure: How to Select the Right One

The pressure figure stamped on a high-pressure ball valve doesn't prove it's right for your circuit. A pump, valve, manifold, hose and fittings work as one pressure boundary. A valve may match the pump's stated pressure and still be unsuitable if...
28mm Speedfit Pipe: Specs, Limits and Installation Guide

28mm Speedfit Pipe: Specs, Limits and Installation Guide

A 28mm Speedfit joint rarely fails because the bore is large. It fails because the pipe never reached the stop. The collet can grip a pipe that still sits short of the O-ring, and the joint looks finished until the system is filled. Insertion, support and a pressure...
1 1/4 Ball Valve Guide: Sizes, Threads and Ratings

1 1/4 Ball Valve Guide: Sizes, Threads and Ratings

The usual advice is to replace a ball valve with another of the same size. That's not enough. A 1 1/4 ball valve can carry the right trade label yet have the wrong thread, a restrictive bore or an unsuitable pressure rating. Treat the size as a starting point for...
Small Hydraulic Cylinders: Types, Sizing and Selection

Small Hydraulic Cylinders: Types, Sizing and Selection

The loader arm lifts cleanly when the tractor first starts, then slowly sinks while you're moving across a cold yard. Before replacing the cylinder, it's worth checking what the unit is being asked to do, how it's mounted and what could happen if it...
Hydraulic Valve Price Guide for UK Buyers

Hydraulic Valve Price Guide for UK Buyers

UK hydraulic valve prices are approximately £20–£80 for standard industrial valves, £150–£600 or more for precision instrumentation-grade valves, and £2,000–£10,000 for electronically actuated multi-valve manifolds with diagnostics. These are indicative bands, not...
UFI Hydraulic Filters Guide to Models and Cross-References

UFI Hydraulic Filters Guide to Models and Cross-References

A service engineer is standing beside a tractor or telehandler with a filter in hand, a machine manual open on the bench and a replacement needed before the equipment can return to work. The housing marking may be unreadable, the old invoice may show only a part...